Ergothioneine (CAS 497-30-3) is a sulfur-containing histidine derivative with the molecular formula C9H15N3O2S and a molecular weight of 229.3, supplied as a white to off-white powder. The grade described in this document is produced by microbial fermentation, giving the natural L-isomer, and assays at 99.8%. It is controlled to 0.1 ppm for lead, arsenic, mercury and cadmium and to 100 cfu/g total plate count, limits drawn from pharmacopoeial and cosmetic specifications rather than from standard food-grade ones. It is used as an antioxidant ingredient in dietary supplements and in anti-aging skincare.
The table below gives every identifier and control limit a buyer normally asks for, so the product can be qualified without a first-round clarification email.
Table 1 Ergothioneine identity and specification summary
|
Item |
Value |
|
Product name |
Ergothioneine (EGT; L-(+)-ergothioneine; thioneine) |
|
CAS number |
497-30-3 |
|
Molecular formula |
C9H15N3O2S |
|
Molecular weight |
229.3 g/mol |
|
Appearance |
White to off-white powder |
|
Assay |
≥99.0% specification; 99.8% verified on batch COA |
|
Production source |
Microbial fermentation (natural L-isomer) |
|
Solubility |
Water-soluble |
|
Loss on drying |
≤0.5% specification; 0.1% verified |
|
Ethanol residue |
≤300 ppm specification; 178 ppm verified |
|
Lead |
≤0.1 ppm specification; 0.083 ppm verified |
|
Arsenic, mercury, cadmium |
≤0.1 ppm specification; not detected |
|
Total plate count |
≤100 cfu/g |
|
Typical applications |
Capsules, tablets, solid beverages, antioxidant serums and creams |
Source: Natural Field batch certificate of analysis, 2026. Limits as stated on the product specification sheet.
Ergothioneine is a sulfur-containing derivative of the amino acid histidine that humans cannot synthesize; it must be obtained from food and is taken into cells by the OCTN1 transporter.
The molecule contains two functional groups that matter commercially. A thioimidazole ring carries the antioxidant activity, and a trimethylammonium group gives the molecule its water solubility. The second point is practical rather than academic: good water solubility means the ingredient can go directly into aqueous formulations and solid beverages without a solubilisation step.
Because the human body has no biosynthetic pathway for ergothioneine, tissue levels depend entirely on dietary intake, and cellular uptake depends on the OCTN1 carrier. This is the mechanism behind the long-running interest in ergothioneine from mushroom-based foods and from supplements, and it is also why the ingredient is positioned as a longevity-related antioxidant rather than a general-purpose one.
Fermentation is the only route that delivers the naturally occurring L-isomer at commercial scale with a stable impurity profile; chemical synthesis risks a racemic mixture, and plant extraction cannot reach useful purity economically.
Table 2 Comparison of ergothioneine production routes
|
Route |
Process characteristics |
Typical problems |
|
Microbial fermentation |
Natural L-isomer; scalable; consistent between batches |
Demands tight control of strain and purification |
|
Chemical synthesis |
Controllable cost |
Racemic mixture likely; extra chiral resolution; complex impurity profile |
|
Mushroom / plant extraction |
Naturally occurring raw material |
Very low content; high extraction cost; seasonal and pesticide-residue exposure |
Source: published literature on ergothioneine biosynthesis; Natural Field process documentation.
Published literature is consistent on one point: ergothioneine is synthesized by fungi and actinomycetes, while plants and animals cannot synthesize it. Fermentation is therefore not a marketing label but the industrial route closest to the form in which the molecule occurs in nature.
For a purchasing team, the source question reduces to three checks that can be asked of any supplier:
— Which strain is used, and is it a recognised ergothioneine-producing organism?
— Is the product confirmed as the L-isomer, and is the analytical method stated?
— How many ion-exchange stages does purification use?
A supplier who cannot answer these three questions usually cannot produce residual solvent data either.
The 99.8% assay shows a stable purification process, but the more informative numbers are the 0.1 ppm heavy-metal limits and the 178 ppm ethanol residue, because both are tighter than ordinary food-grade practice.
Table 3 Physicochemical specification and verified batch results
|
Parameter |
Specification |
Verified |
How to read it |
|
Assay |
≥99.0% |
99.8% |
Close to the ceiling; purification is stable |
|
Loss on drying |
≤0.5% |
0.1% |
Moisture well controlled; low caking and microbial risk |
|
Ethanol residue |
≤300 ppm |
178 ppm |
About 60% of the limit; solvent removal is thorough |
|
Lead |
≤0.1 ppm |
0.083 ppm |
30x stricter than the 1–3 ppm common in food-grade material |
|
Arsenic, mercury, cadmium |
≤0.1 ppm |
Not detected |
All three below the detection limit |
Source: Natural Field batch certificate of analysis, 2026. Detection limits as reported on the COA.
The lead limit is the single most telling figure in this set. Food ingredients commonly carry a lead limit in the 1–3 ppm range; this specification is set at 0.1 ppm and the batch measured 0.083 ppm. That is a pharmacopoeial and cosmetic-grade requirement, not an ordinary food-grade one. Arsenic, mercury and cadmium are held to the same 0.1 ppm ceiling and were not detected, which indicates that cross-contamination is controlled at both the raw-material and the equipment level.
Ethanol residue is listed separately for a reason. Fermentation and crystallisation both involve alcohol washing, and the residue level directly affects the taste of oral products and the documentation required in regulatory filings. At 178 ppm the figure is low enough to be written into a specification sheet without qualification.
A total plate count limit of 100 cfu/g is ten times stricter than the 1000 cfu/g common for food ingredients, and the inclusion of Pseudomonas aeruginosa signals a cosmetic and pharmacopoeial testing scope.
Table 4 Microbiological specification and batch results
|
Parameter |
Specification |
Result |
|
Total plate count |
≤100 cfu/g |
Compliant |
|
Yeast and mould |
≤10 cfu/g |
Compliant |
|
Thermotolerant coliforms |
Negative |
Negative |
|
Salmonella |
Negative |
Negative |
|
Pseudomonas aeruginosa |
Negative |
Negative |
Source: Natural Field batch certificate of analysis, 2026.
Pseudomonas aeruginosa is the item worth explaining. It does not normally appear in the routine panel for food ingredients; it belongs to cosmetic and pharmacopoeial microbiological control. A supplier who reports against this panel is usually saying two things at once: there is a reliable sterilisation step at the end of the process, and part of the customer base has stricter microbiological requirements than food alone would demand.
The process runs through twelve unit operations, and three of them determine the final purity: the ultrafiltration after cell disruption, the second ion-exchange stage, and the crystallisation and aseptic finishing steps.
Seed culture → Fermentation → Membrane filtration → Cell disruption → Membrane filtration → Ultrafiltration → Ion exchange (stage 1) → Ion exchange (stage 2) → Vacuum concentration → Crystallisation → Centrifugation → Drying → Packing (final stages aseptic)
The first critical node is the second membrane filtration and ultrafiltration that follow cell disruption. Once the intracellular product is released it brings a heavy load of protein and cell debris with it, and the cut-off precision of the ultrafiltration step sets the loading on the ion-exchange columns downstream.
The second node is the two-stage ion exchange. A single stage normally removes most same-class impurities; the second stage is what moves the assay from roughly 98% to above 99%.
The third node is crystallisation together with aseptic finishing. Crystal form governs appearance and flowability, and the aseptic section is what allows the microbiological result to sit at 100 cfu/g rather than at a food-grade 1000 cfu/g.
In short, 99.8% is not something found on a certificate; it is something designed into the process.
The difference is not a claim of greater purity but the granularity of what can be verified: six specification dimensions are reported individually rather than as a single pass or fail statement.
Table 5 Six-dimension comparison with typical commercial ergothioneine
|
Dimension |
Typical commercial material |
Natural Field |
|
Source and process |
Synthesis, or purchased crude material re-purified |
Microbial fermentation, entire process in-house |
|
Assay |
Labelled 98%–99%, measured near the lower bound |
99.8% measured |
|
Loss on drying |
Often 0.3%–0.5% |
0.1% |
|
Residual solvent |
Usually not provided |
Ethanol 178 ppm, verifiable |
|
Heavy metals |
Reported as a total, or against a 1–3 ppm basis |
Lead 0.083 ppm; As, Hg, Cd not detected |
|
Microbiology |
Standard four-item panel |
Five items including Pseudomonas aeruginosa |
Source: comparison compiled from public supplier listings and Natural Field batch data, 2026.
Put the same question to two suppliers — is the heavy metal result compliant — and the difference becomes obvious. One answers compliant. The other answers lead 0.083 ppm, arsenic mercury and cadmium not detected, all against a 0.1 ppm limit. The second answer is the one a formulator can file.
It fits oral formats such as capsules, tablets and solid beverages, and topical antioxidant serums and creams, because it is water-soluble, near-colourless in formula and carries almost no nutritional-label burden.
On the oral side the nutrition panel is close to neutral. Per 100 g the ingredient provides 1.2 kcal (5 kJ), with protein and fat at zero, sodium below 5 mg and carbohydrate below 0.1 g. In practice this means high-dose functional beverages can be built without the ingredient adding a meaningful calorie or macronutrient load to the label.
On the topical side it is used mainly in antioxidant and anti-aging serums and creams. Good water solubility and a white to off-white appearance keep the effect on formula colour and odour small, which is the practical advantage it holds over many oil-soluble antioxidants that require solubilisers or leave a tint.
A:CAS 497-30-3, molecular formula C9H15N3O2S, molecular weight 229.3 g/mol.
A:Fermentation yields the L-isomer, matching the form that occurs in nature, with an impurity profile closer to the natural one. Chemical synthesis tends to produce a racemic mixture, requires an additional chiral resolution step, and leaves a different impurity profile.
A:0.1 ppm is the pharmacopoeial and cosmetic requirement, an order of magnitude stricter than the 1–3 ppm common for food ingredients. It corresponds to applications where long-term oral intake and topical safety are scrutinised more closely.
A:It is a standard microbiological control item for cosmetics and topical products rather than for food raw materials. Testing for it indicates that the product is qualified for stricter end uses.
A:A batch certificate of analysis covering physicochemical parameters, individual heavy metals and microbiology; process documentation; and residual solvent data. Market-specific documents can be added according to the destination country.
A:Ergothioneine is a fermentation-derived, water-soluble antioxidant ingredient whose commercial value rests on three verifiable properties: the natural L-isomer from a controlled fermentation route, a 99.8% assay with 0.1 ppm heavy-metal limits, and a microbiological panel that meets cosmetic as well as food expectations. Buyers can qualify a supplier by requesting the four items above — strain, isomer confirmation, ion-exchange stages and residual solvent data — rather than by comparing headline purity claims.
Natural Field supplies fermentation-derived ergothioneine (CAS 497-30-3) with batch-level documentation, and provides samples and specification sheets for formulation trials on request.